Warning: "continue" targeting switch is equivalent to "break". Did you mean to use "continue 2"? in /homepages/20/d521401382/htdocs/clickandbuilds/manuthings/wp-content/plugins/jetpack/_inc/lib/class.media-summary.php on line 77
Warning: "continue" targeting switch is equivalent to "break". Did you mean to use "continue 2"? in /homepages/20/d521401382/htdocs/clickandbuilds/manuthings/wp-content/plugins/jetpack/_inc/lib/class.media-summary.php on line 87 Blog – Page 2 – Manufacturing for Everybody
How many little cubes form this bigger one?
82, 45, 32 or 27?
You can see 27, but in the middle are another 5.
4 of them as the next level holding the 27 together and one in the middle, holding the 4 together. That makes 32 the right answer.
I saw this in a FabLab as a demo what is possible in 3d-printing, because you can hang things together and produce them that way. So I wanted to try myself. It took me some work to create the cubes and hang them together in 3d software without touching any of the beams and risk a clogged up result.
The rest was refreshingly easy. The STL came out flawless and I really liked the manufactured result. It can be used as a work of art or jewellery.
If you want me to make you one, go to “Art” and drop me a line.
You know the problem with soap dishes: most of them hold the water and soon the soap swims in water and is dissolved.
I wanted to keep my oval soap dish but insert a little bed that keeps the soap dry. Due to the design of the dish, I wanted the bed to appear classic. So I downloaded an ornament pattern and resized it to the size of the ground where the soap is placed.
In 3d software, I solidified the ornament pattern, exported an STL, identified a few spots that were to fragile, corrected them and uploaded the new STL to a 3d service. Of all the materials offered (e.g. plastic, steel, bronze, gold, ceramic) I opted for nickel, because it is very similar to the aluminum of the soap dish.
Do you like the result in the picture? Want one? Find it in “Accessories“.
This credit card holder is open on one side and has a window in the middle of both sides to make it possible to flip out the card needed. The clever part is the bending of the window to the inside, so that the cards are being held tight and cannot just slip out. It can hold
I created a box in 3d software and solidified all faces. Then I designed the organic holes pattern and cut it into front and back. The exported STL showed some troubled walls in the heat map. I made these parts a little stronger until a flawless print was possible.
I opted for yellow nylon plastic for its hard but flexible structure and had it 3d printed. You can see the result in the picture.
A bicycle rack for € 70,-? Self developed, custom fitted, no prior crafts experience, no CAD/CAM, no woodwork skills?
This is the story of how everybody can develop and manufacture a perfectly working product today. Things that were possible only with at least a little investment can be done literally for no money today. The manufacturing cost for this bicycle rear rack was in range with the retail prices of regular racks run from 30 – 150 €. But this one fit the requirements much better than anything on can buy on the market.
This was not my first work, but the one with the most work steps. Therefore, it was impressive, how the construction worked out. The rack is not for heavy weights and not for extreme biking. I would not recommend that for mountain biking. But it holds 5 kilograms (26 pounds), which is enough for 6 bottles of wine or my sports bag or my grocery shopping.
My goal was to have a rear rack that I can easily attach and take off, that helps me to carry minor loads like a sports bag or my grocery shopping. The load is to be fixed to the rack with straps.
I started by measuring the beams of the bike, especially the seat tubes and the seat stay. Seat stays of most bikes have a little beam where the rear brakes are located. This beam with the seat stays forms a triangle, and I thought:
It must be possible to hang the rack on the seat tube and support the weight by resting on the little triangle.
So I went to the drawing board. I downloaded a 3d bike model as a base and worked on it in Blender, adapting the width and angles of the bike parts to resemble my own bike.
Then I developed the general construction. When my concept worked out on the drawing board, I prepared the crucial part for manufacturing. The beams were to be made of wood from the DIY-store.
I decided to have the connecting parts 3d-printed and converted my construction drawing into STL format. After uploading my STL-files, my 3d-printing service located a few crucial parts that could result in manufacturing failures. I corrected them in Blender, exported to STL and tried again. This time, I got encouraging feedback and decided to hit the “go” button!
My objects were delivered one week later and I liked the result. I went to the DIY-store and got the beams in the right width, cut them into the right proportions, went home and put it all together.
The result was breathtaking as you can see in the pictures! The rack was really easy to attach and stayed save in place. I put weights on it and the rack carried them without any problem. I went out for a ride with six 1 Liter bottles (=6kg / 13 lbs) and all went perfectly well. I am safe to say, that my bike rack is good for 5kg as are most racks that are not attached to the cogset.
Making your own parts has become a lot easier in the last few years. Nevertheless, it’s not everybody’s thing to acquire CAD skills, 3d know-how and to find the right prototype factory.
MANUTHINGS provides you experts for that. All you have to do is to give them a detailed briefing with exact measurements. Ideally, if you have the part to be replaced (broken or a spare one), you just send it to the designer, for him to take the measurements.
All you have to do as a first step is to describe your need in a briefing and hit the submit button.
There are so many helpful things for the household available in so many shops. And yet, how often do you think: “if only someone would make this thing so and so…”. Do not bother any longer, just make it yourself!
Your tool, your shoes, your dishes, your desk. It all needs some containers to keep it organised. But whatever you can buy, it’s always a little compromise. Do not compromise any longer, just make your organizing containers yourself!
Fashion objects are probably the most exiting category. Did you know, that there are several digital manufacturing methods and that you can create your own fashion articles? Do not shop any longer, just make it yourself!